Sheet plates with low carbon content made from hot rolled coils for cold forming.
Suitable for the bending process. Maximum yield and breakage limits and minimum lengths guaranteed.
Suitable for cold processing.
Standard
EN 10111
Identification Number
1.0332
Classification
–
Type
Unalloyed Steel.
Rolling State
AR – Rolling blank
Brief Description
Sheet plates with low carbon content made from hot rolled coils for cold forming.
Suitable for the bending process. Maximum yield and breakage limits and minimum lengths guaranteed.
Suitable for cold processing.
Applications
All types of applications that require good mechanical characteristics, high hardness, and moderate workability.
Standard Coil Stock Range
| DD11 | 1000 | 1250 | 1500 | 1830 | 2000 |
|---|---|---|---|---|---|
| 1,5 | ● | ● | ● | ||
| 2 | ● | ● | ● | ● | |
| 2,5 | ● | ● | ● | ● | |
| 3 | ● | ● | ● | ● | |
| 4 | ● | ● | ● | ● | |
| 5 | ● | ● | ● | ● | |
| 6 | ● | ● | ● | ● | |
| 8 | ● | ● | |||
| 10 | ● | ● | |||
| 12 | ● | ||||
| 15 | ● |
Chemical Composition
Regulatory standard
| Element | Value |
| C (%) | ≤ 0,120 |
| Si (%) | |
| Mn (%) | ≤ 0,60 |
| P (%) | ≤ 0,045 |
| S (%) | ≤ 0,045 |
| AI (%) | |
| Nb (%) | |
| Ti (%) | |
| V (%) | |
| Mo (%) | |
| Cu (%) |
| Element | Value |
| Cr (%) | |
| Ni (%) | |
| N (%) | |
| B (%) | |
| Nb+Ti+V (%) | |
| Cr+Mo+Ni (%) | |
| Ni+Cr+Cu+Mo (%) | |
| C.E.V. (%) |
C.E.V. (%) = C+(Mn/6)+[(Cr+Mo+V)/5]+[(Ni+Cu)/15]
Mechanical Properties
According to UNI EN 10111
| Mechanical characteristics | Direction | Thicknesses | Values |
| Re (MPa) | T | ≥ 1 < 2 | 170-360 |
| ≥ 2 ≤ 11 | 170-340 | ||
| Rm(MPa) | T | < 440 | |
| A80 (%) | T | ≥ 1 < 1,5 | ≥ 22 |
| ≥ 1,5 < 2 | ≥ 23 | ||
| ≥ 2 < 3 | ≥ 24 | ||
| A5 (%) | T | ≥ 3 ≤ 11 | ≥ 28 |
| Bend Test 180° | |||
| KV 20°C (J) | |||
| KV 0°C (J) | |||
| KV -20°C (J) | |||
| KV -40°C (J) | |||
| KV -50°C (J) |
* = Standard option
t = thickness in mm of the test piece for the bend test
L = Tensile testing carried out on longitudinal test pieces
T = Bend tests carried out on cross-cut test pieces
Tolerances
Tolerances on the dimensions and on the shape UNI EN 10051
Surface condition UNI EN 10163-2
Certifications
EN10204-2.2 or higher
DISCLAIMER: SIDASTICO S.p.A. declines any and all liability for the accuracy and precision of the information herein and reserves the right to modify any part without advanced notice.
We would like to become your trusted partner.
If you have any questions, please do not hesitate to contact us!
Via Astico, 44
36030 Fara Vic.no (VI) – IT
Tel. +39 0445/869500
info@sidastico.com
Stay updated with our newsletter subscription
